This listing is for the Hardware parts only needed to build the complete full version of the “Bicycle BoosterPack” as seen on Instructables.com.
This kit contains 70 total parts (27 unique parts as listed below) which is all the hardware needed to build the full version of the bicycle boosterpack. (Note that this does NOT include the 3D printed or electronic parts required. Feel free to message me for a custom print order.)
If you own a 3D printer, the associated 3D Printable STL files can be purchased separately on Pinshape.com.
The complete list of required electronics can be purchased from 3rd party suppliers I recommend in the BOM in the Instructable.
|001||Frame Tube, Aluminum||1|
|002||Screw, Phillips Thread-Forming||8|
|003||Barrel Nut (aka cross dowel)||2|
|004||Bolt, 1/4″ Thread, 3″ Long||2|
|006||Nylock Nut 1/4″||1|
|008||Lock Nut 5/16″||2|
|009||Set Screw, 3/8″ Long||6|
|010||Set Screw, 5/8″ Long||8|
|011||Spring Pin, 1/4″||1|
|013||Bolt, 5/16″ Thread, 2-1/2″ Length||1|
|014||Velcro Strips, 13.5″, double sided||4|
|015||Hook OR Loop Strip, 4” Adhesive Backed||1|
|016||Machine Screw-Metric large||4|
|017||Machine Screw- Metric small||4|
|018||Hex Key small||1|
|019||Hex Key large||1|
|020||Split Washer – small||4|
|022||Velcro Wire Ties||4|
|023||Wire Harness, 30″||1|
|024||Split Washer large||4|
|025||Hook AND Loop set, 2″ adhesive backed||1|
|026||Hook OR Loop strip, 8″ adhesive backed||2|
|027||Plastic cable ties||3|
UPDATE, Check out my new webstore here!
BoosterPack BOM and Calculations here for reference.
Parts Required to build a BoosterPack that are not included:
Relevant Video Support/Demonstations:
Questions or Feedback? Leave a comment below!